|
QTY.-1- This is our classic Rigid Rolling
Chassis Kit. We believe this to be the highest quality rolling
chassis on the market for the value! We use our custom dead
axle assy.along with the widest 205/50-10 polished rear wheel
on the market! Our frames are professionally fabricated
utilizing a scaled down frame jig that is used in the
fabrication of full scale choppers! We can accommodate any
desirable rake and fork length to give you the look and ride
that YOU like! Included also will be a 9” wide rear heavy
gauge steel rear fender,(not shown in photo) and a show
quality front 144 spoke rim and tire assy. All you will need
to do is add you choice of motor ,clutch , and paint and
you’re ready to go!!
Part#10020
**Was
$649.99**
SALE
PRICE THIS MONTH ONLY
**NOW ONLY $449.99**
Now available with a single down tube
frame
|
  
|
|
***NOW AVAILABLE***
QTY.-1-
Custom Fabricated V-Twin Mini
Chopper Drop Seat Rigid Single Down Tube Frame.
Our frames are professionally built in a precise metal jig
fixture for exact tolerances. They are mainly constructed from
1” thickwall steel tubing that is hydraulically mandrel bent
for precise repeatability. All welded joints are notched for
precise fitting and for structural strength. The rear axle
gussets are laser cut and aligned on the jig for proper
tracking of wheel. Backbone is constructed from 1 1/2"
tubing & the down tube is 1 1/4". The frames can
be fabricated with a standard plate for most all horizontal
V-Twin engine set ups or we can replace that with a lateral
support to accommodate the 49cc and up shifter engines.Neck
bearings included.Part#VTWINFRAM
SALE
PRICE THIS MONTH ONLY
**$249.99**
|
 |
|
QTY.-1-
Custom Fabricated Mini Chopper Rigid Single Down Tube
Frame. Our frames are professionally built in a precise metal
jig fixture for exact tolerances. They are mainly constructed
from 1” thickwall steel tubing that is hydraulically
mandrel bent for precise repeatability. All welded joints are
notched for precise fitting and for structural strength. The
rear axle gussets are laser cut and aligned on the jig for
proper tracking of wheel. Down tube and back bone are
made from 1 ¼” tubing to support most all sportster tanks
including the ones we carry. The frames can be fabricated with
a standard plate for most all horizontal engine set ups or we
can replace that with a lateral support to accommodate the
49cc and up shifter engines.Neck bearings
included.Part#10122
**Only
$199.99**
SALE
PRICE THIS MONTH ONLY
**$149.99**
|
 |
|
QTY.-1-
Custom Fabricated Mini Chopper Rigid Frame. Our frames are
professionally built in a precise metal jig fixture for exact
tolerances. They are mainly constructed from 1” thickwall
steel tubing that is hydraulically mandrel bent for precise
repeatability. All welded joints are notched for precise
fitting and for structural strength. The rear axle gussets are
laser cut and aligned on the jig for proper tracking of wheel.
Down tube is made from 1 ¼” tubing to support most all
sportster tanks including the ones we carry. The frames can be
fabricated with a standard plate for most all horizontal
engine set ups or we can replace that with a lateral support
to accommodate the 49cc and up shifter engines.Neck bearings
included.Part#10021
**Only
$199.99**
SALE
PRICE THIS MONTH ONLY
**$149.99**
|
|
|
Qty.- 1 Billet Aluminum Springer Front
End. Forks are 1" OD x 36" or 40" x 6.5" spread, struts
are 5/8" OD. CNC Machined from 6061-T6 Billet Aluminum. Comes
with risers that accept 7/8" bars. Springer comes unpolished
and can be polished, chromed, powder coated or anodized.
Part#spring
**$299.99**
|
 |
|
QTY- 1 Custom Fabricated front end
assy. for your mini chopper. Are standard front end assy.
is 32" long with a 2 1/2" rise with a 6 3/8" opening for neck
tube and a 4" spacing for most all bicycle wheel assy. Please
specify before purchasing if you need a custom length as
we can accommodate for little or no extra charge !We use
precise laser cut parts and professionally MIG
weld.
Part#10025
**Only
$89.99**
SALE
PRICE THIS MONTH ONLY
**$69.99**
|
|
